New Job Openings at SPIE Oil & Gas Services |Apply Now

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific.

Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams.

We are recruiting to fill the position below:

Job Title: BNAG Construction Lead

Location: Bonny, Rivers

Job description

SPIE Global Services Energy is looking for BNAG Construction Lead to join its workforce in Nigeria.

Job Purpose

The Construction Lead is responsible for leading, coordinating and supervising all day-to-day site construction, installation, integration and mechanical completion activities associated with the IMA Brownfield Modification and Integration Works at the BNAG plant.
The position covers construction readiness, multidisciplinary site execution, mechanical completion, punch-list close-out and handover to the Commissioning Team.
The job holder represents CPY for construction matters and acts as the primary construction focal point towards the EPSCC Contractor, vendors, third parties and BNAG operator representatives.
He/She ensures that all construction activities are performed safely and efficiently, in compliance with approved AFC Design, contractual, quality & safety requirements and construction procedure.
A particular attention must be given to work performed within or close to existing operating facilities, including the management of SIMOPS, Permit to Work requirements, restricted site access, tie-ins, shutdown constraints, heavy lifting operations and protection of existing assets.

Activities
Construction Management:

Lead and coordinate all BNAG site construction activities on behalf of CPY.
Coordinate multidisciplinary construction activities, including civil, structural, mechanical, piping, electrical, instrumentation, telecom and control-system works.
Review and challenge construction methods, job cards, lifting plans and execution sequences
Attend physically critical activities of fabrication and construction
Monitor contractor resources, productivity, performance and corrective actions
Ensure Quality and HSE surveillance/presence is adequate

Planning and progress:

Ensure that site activities are properly sequenced, planned and coordinated with the availability of engineering deliverables, materials, equipment and work fronts in compliance with the applicable SIMOPS and
Permit to Work requirements.
Monitor daily and weekly progress against the approved schedule and look-ahead plans
Validate physical progress and provide accurate construction input to project reporting
Identify schedule deviations, constraints, interfaces risks, opportunities and propose corrective actions.
Participate in constructability reviews, site surveys and construction-readiness assessments.

Check Also:Ongoing Recruitment at Presidential Enabling Business Environment Council (PEBEC) |Apply Now

HSE & quality:

Ensure strict adherence to H3SE rules on the site.
Ensure that risk assessment, safety talks, site inspections and controls for risk activities are implemented
Coordinate audits prior start of activities
Ensure compliance with quality requirements (inspections, ITP, management of non-conformities….)
Implement Stop Work Authority when required
Report any incident and non-conformance

Accountabilities

Safe execution of sites construction activities within the assigned scope
Quality and integrity of installed Modules / Skids / Equipment / spools / Structures, civil works and E&I systems
Effective control of Contractor performance
AOC and mechanical completion milestones
Validation of reports and supporting documents related to construction progress.

HSE Objectives:

Lead by example: Adopt and demonstrate exemplary H3SE behavior, implement H3SE rules and requirements within his area of responsibility, and ensure they are followed by all his team members.
To adopt and demonstrate an exemplary behaviour regarding the Company Ethics and “Code of Conduct” policy and to promote and enforce the Anti-Corruption Program within his team.
Familiarize self with TEPNG emergency procedures, carry out assigned responsibilities safely and report any incident, unsafe act, or operation
To verify that H3SE rules are understood and respected on the worksites (H3SE awareness) and to ensure safe working practices are used by Contractors along all phases of project through proactive approach (site tour management, HSE meetings, etc.)
Take steps to achieve the HSE objectives of the Project including Zero Accident objective
Nurture and maintain high level of safety culture within his team, contractors and subcontractors
Ensure all personnel under his/her supervision are well trained and aware of their HSE responsibilities with continuous monitoring. Reinforce or implement Stop Work Authority on project activities across the different yard
Support and enforce the HSE Project objectives and directives. Make safety suggestions, report any anomalies, unsafe acts or conditions observed.

Profile
Contractor & Project Interface:

Participate in daily and weekly coordination meetings.
Support Company and Contractor in resolution of technical challenges
Ensure strict alignment between construction and engineering
Follow up on technical deviations and contribute to Management of Change (MoC).

Readiness, Commissioning and Handover:

Coordinate readiness and execution of transportation, sequence assembly, and shut-down-related
Monitor and support each punch-item close-out and completion dossier
Assist handover to commissioning

Qualifications

Proven experience in multidisciplinary construction management : 4
H3SE leadership, SIMOPS, and permit to Works: 4
Contractor Construction Coordination: 4
Experience with international EPC projects highly valued: 4
Interface management: 4
Constructability, engineering review: 4
(Degree of mastery: 1: weak – 2: medium – 3: good – 4: excellent)
Professional Experience (number of years) : 15
Experience within project and construction management: (number of years) : 15
Construction engineering degree or equivalent technical qualification.
Proven experience in brownfield modifications within operating process facilities, international EPC/EPCC/EPSCC projects,
Fluent English required. Previous experience in Nigeria or West Africa is an advantage.
Observations: Strong field leadership, clear communication, proactive problem-solving and ability to work in a multicultural environment.

What can we offer you?

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
Working in energy and the environment, sectors of the future at the heart of
sustainable development issues.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: CSP Yard Piping / Mechanical Inspector

Location: Bonny, Rivers

Job description

SPIE Services Nigeria Limited is currently looking for CSP Yard Piping/Mechanical Inspector – to join its work force in Nigeria.

Job Purpose

Provide on-site inspection and technical surveillance of piping and mechanical fabrication, installation, testing, and mechanical completion activities at the CSP fabrication yard.
Ensure compliance with approved drawings, specifications, applicable codes and standards, COMPANY requirements, and the EPCC Contract.
The role supports the Yard Construction Lead in identifying and resolving quality issues, minimizing rework, closing punch-list items, and ensuring piping and mechanical works are completed safely, to the required quality, and in line with the Project schedule through load-out and sail-away.

Accountabilities
HSE & Safe Work Execution:

Promote COMPANY HSE requirements and safe execution of piping and mechanical works.
Verify compliance with applicable PTW, JSA, method statements, and lifting requirements.
Identify and promptly report unsafe conditions or practices.

Construction Surveillance:

Monitor piping fabrication, installation, supports, valves, mechanical equipment installation, and associated works.
Verify compliance with approved drawings, specifications, procedures, codes and standards, and EPCC requirements.
Verify correct material identification, handling, preservation, and installation.

Inspection & Quality Assurance:

Perform surveillance and witness inspections/tests in accordance with approved ITPs.
Monitor pressure testing, flushing/cleaning, reinstatement, dimensional control, and final inspections.
Identify non-conformities and follow Contractor corrective actions through closure.

Mechanical Completion & Punch List:

Participate in E&I completion walkdowns and system/subsystem inspections.
Raise and follow up punch-list items through satisfactory closure.
Verify E&I and ICSS readiness for pre-commissioning and HUC.

Technical & Interface Coordination:

Support resolution of technical queries, field changes, clashes, and construction issues.
Coordinate piping/mechanical interfaces with Engineering, QA/QC, HSE,
Commissioning, and other construction disciplines.
Escalate critical technical, quality, or schedule issues to the Yard Construction Lead.

Progress, Load-out & Handover:

Monitor piping/mechanical progress and highlight constraints impacting mechanical completion or schedule.
Support readiness reviews for load-out and sail-away, including preservation and outstanding work status.
Support handover to offshore installation/HUC and provide offshore follow-up where required.

Profile
Accountabilities:

Ensure piping and mechanical works comply with approved specifications, drawings, ITPs, codes, and EPCC requirements.
Provide effective construction surveillance and quality control, driving timely resolution of defects and non-conformities.
Drive mechanical completion and punch-list closure to meet Project schedule and HUC readiness.
Ensure safe execution and readiness of piping/mechanical systems for load-out, sail-away, and offshore HUC.

HSE Objectives:

Ensure piping and mechanical activities are executed in compliance with COMPANY HSE requirements and approved safe work practices.
Maintain active site presence and intervene immediately on unsafe acts or conditions within the work area.
Verify effective application of PTW, JSA, toolbox talks, and approved method statements for relevant activities.
Promote safe execution of lifting, pressure testing, hot work, equipment installation, and SIMOPS.
Contribute to the Project objective of incident-free fabrication, load-out, and sail-away activities.

Requirements

Degree/HND in Mechanical engineering or equivalent technical discipline
Professional Experience (number of years): 8 to 10
Experience within Construction in Oil and Gas projects: (number of years) :5
Piping & Mechanical Construction Inspection.
Codes, Standard & Quality Requirements (Good working knowledge of ASME, GS and Other relevant International stds).
Mechanical completion, Punchlist management, load- out readiness and construction interface experience.

What can we offer you?

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
Working in energy and the environment, sectors of the future at the heart of
sustainable development issues.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Marine Chief Engineer

Location: Nigeria

Job description

SPIE Global Services Energy is currently looking for Marine Chief Engineer to join its workforce here in Nigeria on ERHA project.

Key Responsibilities

Maintenance and condition monitoring management of following systems/machineries –
- Sewage system (Fwd. and Aft)
- Bilge Pumps and Sludge pumps
- DO Purifier, DO pumps, DO filters
- Fresh water system in FW hydrophore pumps and hydrophore tan
- Calorifier system- checks and maintenance
- Machinery space Fans
- Routine checks and Planned Maintenance for FRAMO SYSTEM.
- Danfoss valve remote control system
- Cargo tank COW machines and PVSVPlan and execute the ordering of spares for designated machinery for forward planning.
Oversee daily production operations to ensure efficiency and compliance with safety and environmental regulations.
Collaborate with the Marine Engineer to develop and implement marine maintenance strategies and procedures.
Monitor and analyze operational performance metrics, identifying areas for improvement.
Work closely with other departments, such as Construction and maintenance (crafts FET/MECH/ELE/IN), to ensure seamless collaboration in closing Class Conditions and observations of Maintenance.
Plan and prepare for Class and Flag inspections in close coordination with Marine Advisor on shore.
Communicate effectively with senior management and other stakeholders regarding operational performance and improvement initiatives.
Maintaining the forward and Aft Machinery spaces in clean and safe conditions.
Doing weekly/Monthly safety/operational checks for Marine machineries.
Planning of jobs for the Marine Engineer on daily basis and review of daily work done
Timely acting and planning to improve marine machinery performance in consultation with Maintenance Supervisor and Marine Advisor.
Maintain system integrity across cargo tanks, ballast systems, deck piping, and marine equipment ensuring leak-free and safe operation
Provide mentorship and coaching to operations team members to enhance their skills and knowledge
Develop and implement training programs to ensure continuous professional development.
Foster a culture of continuous improvement and operational excellence.
Keep self-updated on PSMS, JD and company policies.

Key Performance Indicators
Team Development:

Competency Assessments: Conduct regular competency assessments for Marine Motorman and crew.
Mentorship Engagement: Must be self-motivated and driving the marine maintenance team to achieve common company goals.

Operational Performance:

Work Management System Utilization: Effectively use the work management system to plan, schedule, and execute marine system/machinery maintenance and operational activities.
Energy Isolation Management: Ensure proper implementation of energy isolation procedures during maintenance and shutdown activities.
Performance Metrics: Monitor and analyze key machinery metrics, such as breakdown pattern/ rates, equipment efficiency, and maintenance opportunities optimization.

Continuous Improvement:

Improvement Initiatives: Identify and implement continuous improvement initiatives to enhance the marine maintenance and operation processes.
Cost Savings: Achieve cost savings through process optimization and waste reduction.
Innovation: Encourage and track innovative ideas and solutions from team members and share with Chief Engineer.

Profile
Key Competencies and Skills:

Technical degree for Mechanical/ Marine Engineering
15+ years’ experience in ships operations and maintenance.
Strong leadership and team-building skills
Excellent communication and interpersonal abilities.
In-depth knowledge of shipping industry regulations and best practices.
Proficiency in marine operations and controls, operational management software and tools.
Expertise in work management systems and energy isolation management.
Experience in developing and implementing competency frameworks.
Able to bring Marine Experience onboard FPSO in order to improve marine systems maintenance and operations.
Class 1 Co with proven track record of marine Chief engineer role with actively leading team.
Analytical Thinker: Ability to analyse complex marine operational data and make informed decisions.
Problem Solver: Proactive in identifying issues and implementing effective solutions.
Mentor: Passionate about developing others and fostering a learning environment.
Safety-Conscious: Committed to maintaining a safe and compliant workplace.

Key interfaces:
Overarching alignment:

Maintenance Supervisor: Daily updates on operational/maintenance performance, safety compliance, and team development.
Collaborate on developing and implementing marine maintenance strategies and improvement initiatives.

Operations Team:

Marine Advisor: Regular interaction to collaborate, plan, and support in daily operations and maintenance plans development.
Marine Hull Operators: Guidance to ensure smooth and efficient control of production processes and adherence to safety protocols.
Follow up Operations to execute all physical isolation/deisolation at the hull deck and machinery spaces, incl.

What can we offer you?

Work for an international Group with operations on every continent,
Experience a wide variety of professions within several activities:
- Outdoor networks and street lighting
- Information and communication systems
- Nuclear power
- Maintenance
- Oil and gas
- HVAC engineering
- Electrical engineering
- Mechanical engineering
Working in energy and the environment.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: SURF Shore Pull Lead

Location: Port Harcourt, Rivers

Job description

Provide leadership for the definition and maturation of the shore-pull execution philosophy, constructability, temporary works, beach works, access arrangements, shore crossing preparation and civil readiness requirements, ensuring that the proposed solutions are technically feasible, safe, executable and aligned with project objectives, HSE expectations, schedule and governance requirements.
Be responsible for the civil engineering follow-up, review and validation of all shore-pull related deliverables from the EPC contractor and its subcontractors, including method statements, execution plans, temporary works, access roads, pulling pad, winch foundation, rollers/cradles, trenching, beach works, risk assessments and readiness dossiers, and ensure sa

Activities
H3SE & compliance:

Adopt and demonstrate exemplary behaviour regarding H3SE, to implement H3SE rules and requirements within his area of responsibility and to ensure that required H3SE competencies are within his team.
Demonstrate an exemplary behaviour regarding the Company Ethics and “Code of Conduct” policy and to promote and enforce the Anti-Corruption Program within his team.
Verify that H3SE rules are understood and respected on the worksites (H3SE awareness) and to ensure safe working practices are used by Contractors along all phases of project.

Primary Responsibilities:

Review and validate the shore-pull execution philosophy and basis definition from a civil engineering and constructability perspective, covering temporary works, civil works scope, access and laydown areas, beach preparation, pulling pad, winch foundation, trenching/backfilling, pipe support arrangements, beach crossing constraints, contingency philosophy and site readiness strategy.
Review the EPC contractor’s proposed execution approach, construction sequence, subcontracting strategy, resources, schedule assumptions and main execution risks related to the shore-pull works.
Review required tender documents related to shore-pull civil works, temporary works, subcontractor capability, construction methodology, site preparation and execution readiness requirements.
Review contractor technical proposals, deviations, qualifications and clarifications related to shore-pull civil works, constructability, subcontractor competence, execution planning, HSE risks and readiness requirements for FID.
Lead and coordinate the review and validation of all shore-pull civil engineering and construction deliverables issued by the EPC contractor and its subcontractors.
Ensure that the EPC contractor mobilizes a competent shore-pull/civil works subcontractor with adequate experience, qualified supervision, trained personnel, equipment, consumables, HSE resources and logistical support.

Profile:

Review and validate method statements, execution plans, construction procedures, inspection and test plans, lifting/pulling procedures, temporary works designs, risk assessments and readiness dossiers for shore-pull activities.
Verify subcontractor readiness before mobilization, including organization, manpower plan, equipment list, maintenance status, method-specific competencies, lifting/pulling expertise, emergency arrangements and site supervision coverage.
Validate the design and installation of temporary civil works required for shore pulling, including access roads, laydown areas, pulling pad, winch foundation, anchor blocks, rollers/cradles, pipe supports, trench stability and beach crossing preparation.
Be present on-site during shore-pull preparation and execution to monitor compliance with approved procedures, resolve technical and construction issues, support site decision-making and ensure safe execution.
Coordinate with marine, pipeline, onshore construction, HSE, QA/QC and operations representatives to ensure that shore-pull interfaces are identified, controlled and closed before execution.
Challenge contractor assumptions, construction sequences, resource loading, weather and tidal constraints, contingency measures and critical path activities affecting shore-pull readiness and execution.=
Participate in constructability reviews, readiness reviews, site inspections,
HSE workshops, risk assessments, lifting/pulling reviews, toolbox preparation and pre-start verification before shore-pull operations.
Report progress, critical issues, technical risks, subcontractor performance concerns and required decisions to the SURF Package Manager and relevant project stakeholders.

HSE Objectives:

Familiarize self with TEPNG emergency procedures, carry out assigned responsibilities safely and report any incident, unsafe act, or operation
Nurture and maintain high level of safety culture within the organization, contractors and subcontractors
Support and enforce the HSE Project objectives and directives. Make safety suggestions, report any anomalies, unsafe acts or conditions observed.

Qualification

Civil Engineering/Professional Experience (number of years): 15
Experience within project and project management: (number of years): 10.
Project management
Contractor Management
Civil engineering, temporary works and shore-pull construction management
Method statement review, execution planning, subcontractor readiness and site supervision.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Tow Master – Transportation & Installation

Location: Lagos

Job description

SPIE Services Nigeria Limited is currently looking for Tow Master – Transportation & Installation to join its work force in Nigeria.

Activities

Act as the Company’s lead project marine representative for the T&I campaign, providing marine leadership and technical oversight of the disconnection and removal of FSO UNITY and the transportation, installation, hook-up and mooring of FSO ADIANA, exercising independent judgement and stop-work authority over unsafe operations
Review challenge and formally endorse Contractor marine engineering deliverables, including towing analyses, mooring analyses, stability assessments, sea-fastening designs, ballasting plans and load-out procedures, ensuring compliance with specifications, Class requirements and approved methodologies.
Verify vessel suitability and marine spread capability and lead HAZID, HAZOP, SIMOPS and marine risk assessment workshops, ensuring marine-specific risks across towing, positioning, ballasting and mooring hook-up are identified, quantified and mitigated.
Maintain the project marine risk register covering towing, loss of position, collision, stability, anchor handling, mooring, heavy lifts, vessel availability, metocean and site constraints. Verify that procedures define operating limits, weather-window criteria, hold points, abort criteria and contingency arrangements; escalate unresolved technical risks through to DGM Marine and DGM T&I.
Review challenge and formally endorse Contractor marine engineering deliverables, including towing analyses, mooring analyses, stability assessments, sea-fastening designs, ballasting plans and load-out procedures, ensuring compliance with specifications, Class requirements and approved methodologies
Verify vessel suitability and marine spread capability and lead HAZID, HAZOP, SIMOPS and marine risk assessment workshops, ensuring marine-specific risks across towing, positioning, ballasting and mooring hook-up are identified, quantified and mitigated.
Maintain the project marine risk register covering towing, loss of position, collision, stability, anchor handling, mooring, heavy lifts, vessel availability, metocean and site constraints. Verify that procedures define operating limits, weather-window criteria, hold points, abort criteria and contingency arrangements; escalate unresolved technical risks through to DGM Marine and DGM T&I.
Coordinate with Affiliate Marine Assurance for pre-mobilization inspections, applicable OCIMF/OVID reviews, vetting, vessel acceptance and field-entry permits for the T&I spread. Verify certification, Class status, suitability and closure of findings, and provide evidence for decisions by the designated authorities. Maintain visibility of on-hire/off-hire status, operating restrictions and continued compliance throughout the project for tugs, anchor handling vessels, construction support vessels

Profile

Provide senior marine supervision of the FSO UNITY disconnection sequence, including station-keeping, towing preparations and sailing readiness, and of FSO ADIANA transportation, including weather routing, tow configuration, stability and ballasting.
Lead the technical follow-up of offshore positioning, anchor handling, mooring installation and hook-up operations, acting as the Company’s lead marine representative during critical campaign phases and holding authority to pause or stop activities where safety or integrity is at risk.
Manage technical interactions with Contractors, vessel owners and the Marine Warranty Surveyor, including review of procedures, technical studies, responses to Technical Queries, follow-up of vessel readiness, marine spread performance and offshore execution, and implementation of corrective actions where required.
Prepare daily marine operation reports and provide technical recommendations to the T&I Manager and Project Management, ensuring technical consistency and timely escalation of risks throughout execution.
Ensure that as-built marine documentation, survey records, MWS certificates and lessons learned are properly prepared, reviewed and formally handed over to Operations

Key Interfaces:

Transportation and Installation Contractors and Subcontractors
Marine Warranty Surveyor (MWS) and Classification Societies
Company Project Team
Company HQ Technical Specialists
Installation Contractor and Marine Spread Providers
HSE and Quality teams
Affiliate Marine Assurance Team

Qualification:

Degree or Diploma in Marine Engineering, Nautical Science, Marine Transportation, Naval Architecture or Offshore Engineering, or equivalent, together with a Master Mariner (Unlimited), Chief Mate Unlimited, Chief Marine Engineer Officer (> 3000 KW), 2nd Marine Engineer Officer (>3000 KW), Barge Master or Tow Master certification.
Proven experience in offshore transportation and installation projects, including towing operations, anchor handling, mooring installation, stability and ballast control, marine warranty survey processes and FSO/FPSO-related marine campaigns.
Demonstrated experience in a senior marine leadership role such as Barge Master, Tow Master or Chief Officer/Chief Engineer on major offshore campaigns, with strong capability to manage technical interfaces, Contractors, Marine Warranty Surveyors and execution risks under significant autonomy; previous experience as Company Representative offshore is highly desirable.
Professional Experience (number of years): 15

Offshore Certifications:

Valid offshore medical fitness certificate.
Valid BOSIET/HUET certification from an OPITO-approved training provider.
Valid GSES certification, required to act as Company Representative during the transportation and installation phase.

Application Closing Date
Not Specifred.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: E3D Model Lead & PDMS Administrator

Ref: 2026-44888
Location: Port Harcourt, Rivers

Job Description

We are currently looking for E3D Model Lead & PDMS Administrator – to join its work force in Nigeria.

Suitable candidate shall be responsible for:

Setup and administer an AVEVA 3D database for the Project Portfolio Management organization.
Develop workflows to optimize the benefit of the new engineering design system and continually improve same with lessons learnt and industry best practices.
Develop and maintain accurate 3D plant models using AVEVA E3D, based on approved engineering drawings, specifications, project standards, and design inputs.
Create and modify equipment, piping, structural steel, supports, platforms, ladders, and other plant components within the E3D environment.
Provide support and resources to all projects within the perimeter of PPM organizational structure
Interpret engineering deliverables such as P&IDs, equipment layouts, piping specifications, line lists, plot plans, datasheets, and vendor information and translate them into an accurate 3D model.
Ensure the 3D model reflects the latest approved engineering information and is aligned with project design requirements, codes, standards, and client specifications.
Carry out model reviews and design checks to identify clashes, accessibility issues, constructability concerns, and other potential design problems before fabrication or construction.
Perform clash detection and model validation, coordinating with other disciplines to resolve spatial conflicts and minimize rework.
Develop piping layouts with appropriate consideration for routing, accessibility, operation, maintenance, stress requirements, supports, drainage, venting, and constructability.
Maintain proper model hierarchy, naming conventions, tagging, attributes, and database integrity in accordance with project and E3D standards.
Produce and update isometric drawings, general arrangement drawings, orthographic views, and other model-generated deliverables as required.
Verify equipment, piping, structural, and instrumentation components.
Support model corrections, update workflows, record findings and provide clear technical review comments.
Collaborate with engineering, design, and information management teams.
Participate in quality assurance and model verification activities.

Requirements

Degree or Diploma in Engineering Design or Drafting. A B.Eng. / B. Tech is an added advantage.
Minimum of 5 years in AVEVA E3D/PDMS modelling and management.
Proficiency in Navisworks.
Expert Level Skills in AutoCAD.
Expert level in point cloud processing and model validation workflows.
Oil & Gas, Energy, Petrochemical, Infrastructure, or Industrial Facilities.
Familiarity with various modules of AVEVA E3D – Draw, Iso-draft, paragon, Administration & Lexicon.
Strong ability to model piping/structural/electric designs using AVEVA E3D.
Ability to setup MDS – multidisciplinary support system.
Ability to setup and manage projects and databases using appropriate AVEVA E3D modules.
Production of design deliverable from AVEVA E3D – piping isometrics, plot plan/PGAD, MTO, portable viewing model on Navisworks and
file import from other software and export from AVEVA to other format.
Modelling from 3D laser scan to AVEVA.
Expert Proficiency in 2D & 3D CAD with minimum 3years as key user of AVEVA PDMS/ E3D.
Projectized work environment / culture.
Experience in Oil and Gas EPC Projects.
Knowledge of plant design, constructability, operability, maintainability, and multidisciplinary coordination.
Competent in 3D model review, clash detection, model validation, and design checking.
Understanding of piping components, valves, fittings, supports, equipment, structural steel, and access requirements.
Ability to work effectively with multidisciplinary engineering and design teams.
Good problem-solving skills with the ability to identify and resolve technical and spatial design issues.
Ability to work to tight project schedules while maintaining quality and design consistency. Experience working with laser scan point clouds and industrial E3D models

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Resident Site Engineering Superintendent

Ref: 2026-4488
Location: Port Harcourt, Rivers

Job Description

We are currently looking for RSES-D to join its work force in Nigeria. The RSES-D guarantee that construction works are carried out in compliance with project objectives, HSE rules, ISO 14001requirements, project specifications and technical dossiers, technical requirements, approved cost and schedule targets, with full professional and ethical integrity. He is the Company representative in BONNY.

RSES-D

Exercise the delegated RSES authority within the assigned perimeter.
Ensure that activities within the delegated perimeter are performed safely and in accordance with applicable HSE rules, procedures and technical references.
Lead each party towards schedule and performance objectives of the project.
Coordinate interfaces between construction, commissioning, production and other simultaneous activities.
Participate in the assessment and control of risks associated with SIMOPS.
Verify that appropriate risk control measures are in place before authorizing work.
Ensure the proper implementation of the Permit to Work system within the delegated perimeter.
Coordinate with the BNAG RSES (Renaissance), and other Operators involved in Onshore Pipeline. Immediately report any significant change to the work program or operating conditions.
Maintain clear communication with Operations, HSE personnel, supervisors and contractors.
Stop or suspend any activity considered unsafe or likely to endanger personnel, facilities or the environment.
Contribute to the management of emergency situations in coordination with the Site RSES and the site emergency response organization.
Coordinate and support all security and community assessments at site

Don’t Miss:Flour Mills of Nigeria Plc Recruitment 2026: Latest Job Vacancies – Apply Now

Temporary Construction Camp (TCC) security and management:

Responsible for the TCC safety and security in coordination with the EPC Contractor and GSF team
Control and manage the POB

Health, Safety and Environment Responsibilities (HSE):

Ensure that contractors’ HSE practices are acceptable and that HSE procedures and preventive measures are properly understood and implemented
Ensure that all risks associated with the activities and the operating environment are correctly identified, assessed and incorporated into the planning of the works
Manage and sign the Work permits in his dedicated area (out of process area)
Ensure that construction equipment and resources are compliant, suitable for their intended purpose and properly used by personnel
Ensure that the required controls are correctly and effectively implemented.
Report any anomalies with a minimum target of twenty-five (25) reported anomalies per year and encourage reporting across the Workforce
Enforce implementation of Company Golden Rules
Act on a daily basis in compliance with the project HSE commitments.
Ensure that the Environmental Management System is monitored and implemented in accordance with the requirements of the ISO 14001 standard.

Profile
Site Team Leadership and Coordination:

Lead and coordinate the project team in BONNY for all IMA project packages and across all disciplines.
Ensure effective supervision and control of contractors’ activities throughout the execution of the works to meet objectives of both packages

Construction and SIMOPS Coordination:

Coordinate all contractor activities carried out within the IMA project enclosed construction area or under SIMOPS conditions in BNAG, along the Onshore pipeline works or on the shore pull for SURF package works
Manage operational interfaces with the BNAG RSES
Act as the Project Manager’s representative on Site
Serve as the main point of contact for contractors working on the construction Site.

Issues and Changes Management:

Anticipate and assess the significance and urgency of potential issues.
Obtain the implementation of appropriate corrective actions within the applicable contractual framework.
Submit any variation, change or potential contractual impact to the Project Manager and the relevant management for prior approval.

Progress Monitoring and Reporting:

Obtain and verify the physical progress of the works for each package
Monitor actual execution hours and total hours worked
Ensure that the associated progress and manpower reports are accurate and properly maintained
Issue a weekly report for each package
Verify that contractors’ reports accurately reflect the actual status of the works
Prepare and submit a final report to management, including an assessment of Quality and Schedule performance
Ensure that all documents required for the preparation of the Final Documentation Dossier, DFA, have been produced and are adequate.
Perform any additional duties falling within the position holder’s area of competence, in accordance with management instructions.
Ensure that the performance of packages and the plan are in line with contract.

Requirements

Professional Experience (number of years): 15
Very good knowledge of multidisciplinary construction activities.: (number of years): 15
Proven experience in Brownfield / SIMOPS projects
Strong HSE leadership and authority
Progress reporting
Good understanding of engineering documents.
Strong coordination and interface management skills.
Ability to anticipate operational and construction risks and manage priorities in a complex operational environment.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online