The Nigerian Content Development and Monitoring Board (NCDMB) was established in 2010 by the Nigerian Oil and Gas Industry Content Development (NOGICD) Act. NCDMB is vested with the mandate to make procedures that will guide, monitor, coordinate, and implement the provisions of the NOGICD Act signed into law on April 22, 2010.
We seek highly qualified, competent, and hardworking candidates to occupy the vacant positions listed below:
Job Title: Construction Surveillance Personnel
Location:Nigeria
Roles & Responsibilities
- Conduct daily surveillance of construction activities at site.
- Verify work exccusion against approved drawings, procedures, and specifications.
- Identify and report non-conformances and unsafe practices.
- Support HSE compliance monitoring and toolbox engagements.
- Coordinate with QA/QC and engineering trams on technical clarifications.
- Provide accurate progress and surveillance reports.
- Ensure contractors comply with project standards and local consent requirements.
- Support on-the-job coaching for local construction personnel.
Qualifications & Experience
- Bachelor’s Degree in Engineering, Construction, or related discipline.
- Minimum 10 years experience in oil & gas construction supervision or surveillance.
- Experience working with EPC contractors and multi-disciplinary seams.
- Good understanding of construction safety and quality standards.
- Ability to interpret engineering drawings and specifications.
- Field surveillance and reporting
- Attention to decail
- Construction quality awareness
- Safety-first mindset
- Communication and teamwork.
Job Title: Marine Advisor III
Location:Nigeria
Roles & Responsibilities
- Lead on the provision of specialist advice on the day to day marine management issues in specific geographic areas.
- Lead on and/or coordinate provision of expert technical marine advice on development and other casework/information requests in MPAs in marine areas, with advice as required from Advice Team and Marine Monitoring, Assessment and Reporting Team, Includes complex high-profile proposals and NSIPS/DNS.
- Provide expert marine advice to the development and implementation of Ares statements.
- In particular, take a lead role in local delivery of SMNR in the marine and coastal environment within the geographic ares, working with the marine Area Statement Advisor.
- Expert witness role in public inquiries and similar fora as required.
- Quality assure, interpret and advise on external and internal reports/assessments
- Develop and maintain effective stakeholder relationships and cagagement, including liaison and partnership working in particular with respect to marine protected areas
- Influence and contribute to the development and delivery of NRW Marine Service Plan and Marine Programme, and other relevant NRW policy, strategy and process, working collaboratively with EPP colleagues.
- Provide expert technical and operational advice to the development of corporate standards/process and guidance
- Cooperation with and provision of marine advice to local teams on designated sites with coastal fringe.
- Work collaboratively with the marine Advice Team and Marine Monitoring, Assessment and Reporting Team, delivering some aspects of monitoring, analysis and reporting activities relevant to geographic areas/sites.
- Mentor and coach other members of the team and colleagues as required.
- Contribute to the development and subsequent implementation of casework guidance,
- Contribute technical advice into enforcement cases, both internal and with Nigerian Government regarding marine licenses.
- Required to take part in marine pollution incident response and preparedness.
Qualifications & Experience
- Bachelor’s Degree in Marine Engineering, Nautical Science, or related discipline.
- Master Mariner or equivalent marine certification is an advantage.
- Minimum 16 years experience in offshore zmarine operations within oil & gas industry.
- Experience with offshore construction projects and vessel assurance.
- Substantial marine technical skills and experience
- Significant knowledge of marine legislative requirements particularly marine conservation
- Good knowledge and experience of marine monitoring and analysis methods
- Substantial knowledge and experience of marine casework
- Good marine evidence analysis and interpretation skills, report critiquing and writing skills
- Good understanding of the marine and coastal development sector experience of marine pollution contingency planning
- Strong Influencing skills and ability to communicate, negotiate and collaborate effectively both internally and externally at senior levels Project management/project coordination skills
- Coaching and mentoring skill
- Strong understanding of marine safety, risk management, and contractor oversight.
Job Title: Well Completion / Well Intervention Advisor
Location:Nigeria
Roles & Responsibilities
- Guarantee the accomplishment of the Deepwater well interventions with OIMIR vessel or drilling rig
- Compliance with codes of practice, safety and environmental protection.
- Ensore integrity threats are properly assessed and appropriate remedial action plans implemented,
- Ensure the suitability to operational requirements of personnel, equipmeet and services.
- Prepare operation guidelines and programs for Well intervention operations.
- Execute operations on deepwater in time and under budges
Qualifications & Experience
- Degree in Petroleum Engineering or related discipline.
- Minimum 10 years experience in Well Completion and/or Well Intervention operations.
- Valid IWCF or equivalent well control certification.
- Experience in offshore oc deepwater operations is preferred.
- Strong understanding of well integrity, risk managensent, and operational planning.
- Execute Deepwater Well Intervention Progrants, contingency guidelines & operations per Company objectives and rules.
- Provide specialized technical Support to Company Deepwater well assets as required regarding Stimulation, Coiled Tubing.
- Slick line, Electric line, tractor and RDS related tools and services.
- Focal point for execution on Stimulation, Coiled Tubing, Slick line, Electric line, tractor and RDS contracts
- Ensure appropriate equipment, tooting, spares inventory follow-up. Maintenance and purchase of asset requirements.
- Normalize methodology on Stinsulation, Coiled Tubing, Slick line, Electric line, tractor and RDS on OML via contingency guidelines.
- In-charge of Intervention operation on the Rig and Light Well Intervention Vessel, Expected to go offshore for all intervention operations.
- Maintain good interface with completion, drilling and other seams for optimization of well intervention operations
- Prepare the end of well intervention report capturing lessons to improve future work Participate and drive investigations into operational incidents in sphere of control.
- Ensure lessons integrated into future well programa & existing guidelines/GDCP, Fallow up and ensure close out of related action items.
- Must have supervisory level (4) of IWCF Intervention (combined Slickline, E-Line, Coiled Tubing & Snobbing) certification
- Must have Combined Surface and Subsea IWCF (Level 4) Certification Define scope of work /supply for well intervention related Invitation to Tender/Call for Tender exercises
- Participate in technical evaluation of well intervention CFT and Contractor site visit and evaluation.
- Involved in engineering of solutions for all issues related to the well requiring intervention.
- Ensure the tender captures experience from previous contracts and operations
- Responsible for follow up of new technologies for welt intervention solutions and optimization
- Responsible for Intervention operation Performance Tracking Large Deepwater developments; Personnel will work in support of Company Deepwater field developments At all times,
The Service holder will:
- Demonstrate personal commitment to the HSE Policy and actively participate in Company safety initiatives
- Be in the chain of command for OIMR Vessel intervention/ Light Well intervention vessel operations.
- Follow up affiliate well integrity issues srouble shooting and propose intervention solutions to resolve integrity issues
- Dernonstrate full compliance and leadership in procurement code of conduct
- Ensure contractors respect Company E&P referential standards and International standards
- Control and manage communication, in particular in case of high risk and emergency situations.
- Actively participate, when required, to the board of inquiry and emergency management team.
- Be part of Audit team to perform auditing of the Contracted Service providers
In undertaking this role, the Service holder will:
- Proactively carry out the activities of the Service and be responsible for meeting agreed objectives
- Adapt to changes in work practices and Service activities
- Act in the best interest of Company as all times
- Seek out learning opportunities and transfer new skills and knowledge to the Service Adhere to the values and principles of the Company Code of Conduct at all times
- Willingly and openly share good practice
- Ensure all HSE, Technical, and Compliance Trainings are up to date.
Job Title: Quality Assurance Analyst III
Location:Nigeria
Roles & Responsibilities
- Implement the approved Quality Management System (QMS) and project quality plans for electrical works
- Ensure electrical construction activities comply with approved ITPs, method statements, and procedures
- Conduct thorough inspections of static equipment (pressure vessels, tanks, piping) to ensure compliance with engineering drawings, codes, and standards.
- Perform visual inspections, dimensional checks, and non-destructive testing (NDT) to identify defects and ensure structural integrity.
- Review and verify welding procedures, welder qualifications, and welding quality to maintain the highest standards of workmanship.
- Monitor and control quality documentation, including inspection and test plans, material certificates, and welding records.
- Implement and maintain quality contrel procedures, ensuring adherence to project specifications and client requirements.
- Provide technical expertise and guidance on quality-related matters to project teams and contractors.
- Conduct and coordinate inspections for electrical installations including containment, cabling, equipment installation, and terminations
- Prepare, submit, and follow up Inspection Requests (IRs) with consultants and clients
- Witness and verify testing activities such as insulation resistance tests, continuity tests, earth resistance tests, functional testing, and pre-commissioning
- Review electrical material submittals and ensure only approved materials are used on-site
- Maintain quality records ineluding IRs, test reports, checklists, and calibration certificates Raise, track, and close Non-Conformance Reports (NCRs), observations, and corrective actions
- Ensure electrical installations comply with contract documents, drawings, specifications, and authority requirements
- Support authority inspections, energization approvals, and final certification
- Coordinate QA/QC activities with construction teams, subcontractors, and consultants
- Provide guidance to site teams on electrical quality requirements and workmanship standards
- Participate in quality meetings, audits, and site walkthroughs
- Support pre-commissioning, commissioning, and energization activities
- Verify system readiness prior to handover
- Assist in preparation and review of as-built drawings and O&M manuals.
Qualifications & Experience
- Bachelor’s Degree in Engineering, Quality Management, or related discipline.
- Minimum 8 years QA/QC experience in oil & gas projects.
- Certified Quality Auditor or equivalent certification is preferred.
- Strong understanding of ISO 9001 and project quality systems.
- Experience with fabrication, construction, or contmissioning quality processes.
- Proven experience with NDT methods such as UT, RT, and PT, ensuring proficiency in defect detection and assessment.
- Demonstrates fluency in English, both written and verbal, for effective communication and report writing.
- Exhibits strong analytical and problem-solving skills, enabling effective identification and ecsolution of quality issues
- A team player with excellent communication and interpersonal skills, facilitating collaboration within project teams.
- Physically fit and capable of working in various environments, including beights and confined space, for site inspections.
- Familiarity with relevant international codes and standards such as ASME, ASTM, and EN, ensuring compliance.
Also See:Employment Opportunities at Nestoil Limited
Job Title: Construction Site Lead III
Location:Nigeria
Roles & Responsibilities
- Administration of the Construction Department on a day-to-day basis and informing the Maintenance Superintendent of all developments.
- Ensure that all staff including contractors have adequate information to carry out tasks safely and efficiently, in compliance with control measures and sire safety precautions.
- Report incidents and non-conformities.
- Ensure that the safety, health and welfare of all the construction team are maintained to company policy and statutory standards.
- Support in the resourcing and development of construction personnel.
- Support the construction team to reach the required standard of competency. Ensure commitment to the Technical and Operation Integrity Standards for all maintenance, services and engineering works that are completed by the construction team.
- Contribute to the creation and maintenance of operational budgers.
- Liaise with contractors, onshore support teams and other departments, keeping them informed of activities that may affect them.
- Provide clear and concise communication of priorities to relevant personnel, including team meetings, handovers and information on targets and performance.
- Perform tasks in a safe and responsible manner, ensuring all personnel under their jurisdiction including Service Engineers, do the same.
- Raise Purchase Requisitions for the ordering of spare equipment and confirm the correct delivery.
- Knowledge of Maintenance Managensent System (MMS) along with the ability to input/extract data as required.
- Maintain use Construction Department Maximo inputs and manage the same on á régutar basis.
- Administration of Maximo Maintenance Management System (MMS) for Planned and Corrective Maintenance work orders relating to construction department.
- The Construction Lead is responsible for ensuring that applicable bolted joints are managed in compliance with the bolted joint integrity manual and associated documents.
- Supervise all construction and fabric maintenance work to ensure they are carried out safely and to an acceptable standard in accordance with company procedures.
- Ensure all air driven tools and equipment are stored and maintained as per maintenance strategy.
- Ensure all specific training certificates for construction department personnel are valid and updated as required.
- Act as offshore focal point for any planned outage/shutdown as instructed by the Maintenance Superintendent
- Liaise with onshore Facilities Engineer to ensure all work is carried out as per 2 weekly plan.
Qualifications & Experience
- Bachelor’s Degree in Engineering, Construction, or related discipline.
- Minimum 10 years experience in oil & gas construction supervision of surveillance.
- Combined Offshore Survival, Fire Fighting and HUET Certificate
- MIST/IMIST
- Oil & Gas Offshore Medical Certificate
- Oil & Gas Certificate of Fitness to Participate in Emergency Response Team Duties
- Approved Awarding Body Mechanical Engineering qualification or equivalent experience
- Experience in a relevant Construction role on Offshore/ Onshore oil installation preferably and FPSO.
How to Apply
Interested and qualified candidates should send their CV along with all relevant certificates and documents to: elrecruitment70@gmail.com and ensure to copy stakeholder.recruitment@ncdmb.gov.ng using the job title as the subject of the mail.
Note
- Experience on an FPSO. Experience on BONGA FPSO is an added advantage.
- All positions require possession of relevant valid documents such as BOSIET, OSP.
- Kindly note that non-adherence to the instruction above, will mean immediate disqualification.
Application Closing Date:31st March, 2026.
